Deploy a Build

This guide walks you through the process of deploying a NeoDash build onto your own webserver.

1. Prepare the files

First, check that you have the correct files. We typically provide builds as either a zip file or tarball with the following naming convention: neodash-2.X.X.zip or neodash-2.X.X.tar.gz.

For zip files, open up the terminal and run:

unzip neodash-2.X.X.zip

For tar.gz files, open up the terminal and run:

tar -xf neodash-2.X.X.tar.gz

After running either of these, you should now have a folder neodash-2.X.X in the current directory.

2. Edit Configuration (Optional)

This is an optional step if you want to configure optional settings for your NeoDash deployment (e.g. SSO or standalone mode).

  1. Inside the folder you just unzipped, open up config.json.

  2. Edit this file to modify your Configuration settings.

  3. Save the file.

3. Move the tarball/zip to your webserver

Finally, copy the files to the correct folder on your webserver. Depending on the webserver type and version, this could be different directory. As an example - to copy the files to an nginx webserver using scp:

scp neodash-2.2.4 username@host:/usr/share/nginx/html

NeoDash should now be visible by visiting your (sub)domain in the browser. Can’t see the application? Check that the webserver user has read-permissions on the files you copied into the HTML directory.