Dijkstra Single-Source Shortest Path

Glossary

Directed: Directed trait. The algorithm is well-defined on a directed graph.
Directed: Directed trait. The algorithm ignores the direction of the graph.
Directed: Directed trait. The algorithm does not run on a directed graph.
Undirected: Undirected trait. The algorithm is well-defined on an undirected graph.
Undirected: Undirected trait. The algorithm ignores the undirectedness of the graph.
Heterogeneous nodes: Heterogeneous nodes fully supported. The algorithm has the ability to distinguish between nodes of different types.
Heterogeneous nodes: Heterogeneous nodes allowed. The algorithm treats all selected nodes similarly regardless of their label.
Heterogeneous relationships: Heterogeneous relationships fully supported. The algorithm has the ability to distinguish between relationships of different types.
Heterogeneous relationships: Heterogeneous relationships allowed. The algorithm treats all selected relationships similarly regardless of their type.
Weighted relationships: Weighted trait. The algorithm supports a relationship property to be used as weight, specified via the relationshipWeightProperty configuration parameter.
Weighted relationships: Weighted trait. The algorithm treats each relationship as equally important, discarding the value of any relationship weight.

Introduction

The Dijkstra Shortest Path algorithm computes the shortest path between nodes. The algorithm supports weighted graphs with positive relationship weights. The Dijkstra Single-Source algorithm computes the shortest paths between a source node and all nodes reachable from that node. To compute the shortest path between a source and a target node, Dijkstra Source-Target can be used.

The GDS implementation is based on the original description and uses a binary heap as priority queue. The implementation is also used for the A* and Yen’s algorithms, as well as weighted Betweenness Centrality. The algorithm implementation is executed using a single thread. You can consider Delta-Stepping for an efficient parallel shortest path algorithm instead.

Syntax

This section covers the syntax used to execute the Dijkstra algorithm in each of its execution modes. We are describing the named graph variant of the syntax. To learn more about general syntax variants, see Syntax overview.

Dijkstra syntax per mode

Run Dijkstra in stream mode on a named graph.

CALL gds.allShortestPaths.dijkstra.stream(
  graphName: String,
  configuration: Map
)
YIELD
  index: Integer,
  sourceNode: Integer,
  targetNode: Integer,
  totalCost: Float,
  nodeIds: List of Integer,
  costs: List of Float,
  path: Path

Table 1. Parameters
Name	Type	Default	Optional	Description
graphName	String	`n/a`	no	The name of a graph stored in the catalog.
configuration	Map	`{}`	yes	Configuration for algorithm-specifics and/or graph filtering.

Table 2. Configuration
Name	Type	Default	Optional	Description
nodeLabels	List of String	`['*']`	yes	Filter the named graph using the given node labels. Nodes with any of the given labels will be included.
relationshipTypes	List of String	`['*']`	yes	Filter the named graph using the given relationship types. Relationships with any of the given types will be included.
concurrency	Integer	`1`	yes	The algorithm is single-threaded and changing the concurrency parameter has no effect on the runtime.
jobId	String	`Generated internally`	yes	An ID that can be provided to more easily track the algorithm’s progress.
logProgress	Boolean	`true`	yes	If disabled the progress percentage will not be logged.
sourceNode	Integer	`n/a`	no	The Neo4j source node or node id.
relationshipWeightProperty	String	`null`	yes	Name of the relationship property to use as weights. If unspecified, the algorithm runs unweighted.

Table 3. Results
Name	Type	Description
index	Integer	0-based index of the found path.
sourceNode	Integer	Source node of the path.
targetNode	Integer	Target node of the path.
totalCost	Float	Total cost from source to target.
nodeIds	List of Integer	Node ids on the path in traversal order.
costs	List of Float	Accumulated costs for each node on the path.
path	Path	The path represented as Cypher entity.

The mutate mode creates new relationships in the projected graph. Each relationship represents a path from the source node to the target node. The total cost of a path is stored via the totalCost relationship property.

Run Dijkstra in mutate mode on a named graph.

CALL gds.allShortestPaths.dijkstra.mutate(
  graphName: String,
  configuration: Map
)
YIELD
  relationshipsWritten: Integer,
  preProcessingMillis: Integer,
  computeMillis: Integer,
  postProcessingMillis: Integer,
  mutateMillis: Integer,
  configuration: Map

Table 4. Parameters
Name	Type	Default	Optional	Description
graphName	String	`n/a`	no	The name of a graph stored in the catalog.
configuration	Map	`{}`	yes	Configuration for algorithm-specifics and/or graph filtering.

Table 5. Configuration
Name	Type	Default	Optional	Description
mutateRelationshipType	String	`n/a`	no	The relationship type used for the new relationships written to the projected graph.
nodeLabels	List of String	`['*']`	yes	Filter the named graph using the given node labels.
relationshipTypes	List of String	`['*']`	yes	Filter the named graph using the given relationship types.
concurrency	Integer	`4`	yes	The number of concurrent threads used for running the algorithm.
jobId	String	`Generated internally`	yes	An ID that can be provided to more easily track the algorithm’s progress.
sourceNode	Integer	`n/a`	no	The Neo4j source node or node id.
relationshipWeightProperty	String	`null`	yes	Name of the relationship property to use as weights. If unspecified, the algorithm runs unweighted.

Table 6. Results
Name	Type	Description
preProcessingMillis	Integer	Milliseconds for preprocessing the graph.
computeMillis	Integer	Milliseconds for running the algorithm.
postProcessingMillis	Integer	Unused.
mutateMillis	Integer	Milliseconds for adding relationships to the projected graph.
relationshipsWritten	Integer	The number of relationships that were added.
configuration	Map	The configuration used for running the algorithm.

The write mode creates new relationships in the Neo4j database. Each relationship represents a path from the source node to the target node. Additional path information is stored using relationship properties. By default, the write mode stores a totalCost property. Optionally, one can also store nodeIds and costs of intermediate nodes on the path.

Run Dijkstra in write mode on a named graph.

CALL gds.allShortestPaths.dijkstra.write(
  graphName: String,
  configuration: Map
)
YIELD
  relationshipsWritten: Integer,
  preProcessingMillis: Integer,
  computeMillis: Integer,
  postProcessingMillis: Integer,
  writeMillis: Integer,
  configuration: Map

Table 7. Parameters
Name	Type	Default	Optional	Description
graphName	String	`n/a`	no	The name of a graph stored in the catalog.
configuration	Map	`{}`	yes	Configuration for algorithm-specifics and/or graph filtering.

Table 8. Configuration
Name	Type	Default	Optional	Description
nodeLabels	List of String	`['*']`	yes	Filter the named graph using the given node labels. Nodes with any of the given labels will be included.
relationshipTypes	List of String	`['*']`	yes	Filter the named graph using the given relationship types. Relationships with any of the given types will be included.
concurrency	Integer	`1`	yes	The algorithm is single-threaded and changing the concurrency parameter has no effect on the runtime.
jobId	String	`Generated internally`	yes	An ID that can be provided to more easily track the algorithm’s progress.
logProgress	Boolean	`true`	yes	If disabled the progress percentage will not be logged.
writeConcurrency	Integer	`value of 'concurrency'`	yes	The number of concurrent threads used for writing the result to Neo4j.
writeRelationshipType	String	`n/a`	no	The relationship type used to persist the computed relationships in the Neo4j database.
sourceNode	Integer	`n/a`	no	The Neo4j source node or node id.
relationshipWeightProperty	String	`null`	yes	Name of the relationship property to use as weights. If unspecified, the algorithm runs unweighted.
writeNodeIds	Boolean	`false`	yes	If true, the written relationship has a nodeIds list property.
writeCosts	Boolean	`false`	yes	If true, the written relationship has a costs list property.

Table 9. Results
Name	Type	Description
preProcessingMillis	Integer	Milliseconds for preprocessing the graph.
computeMillis	Integer	Milliseconds for running the algorithm.
postProcessingMillis	Integer	Unused.
writeMillis	Integer	Milliseconds for writing relationships to Neo4j.
relationshipsWritten	Integer	The number of relationships that were written.
configuration	Map	The configuration used for running the algorithm.

Examples

All the examples below should be run in an empty database.

The examples use Cypher projections as the norm. Native projections will be deprecated in a future release.

In this section we will show examples of running the Dijkstra algorithm on a concrete graph. The intention is to illustrate what the results look like and to provide a guide in how to make use of the algorithm in a real setting. We will do this on a small transport network graph of a handful nodes connected in a particular pattern. The example graph looks like this:

The following Cypher statement will create the example graph in the Neo4j database:

CREATE (a:Location {name: 'A'}),
       (b:Location {name: 'B'}),
       (c:Location {name: 'C'}),
       (d:Location {name: 'D'}),
       (e:Location {name: 'E'}),
       (f:Location {name: 'F'}),
       (a)-[:ROAD {cost: 50}]->(b),
       (a)-[:ROAD {cost: 50}]->(c),
       (a)-[:ROAD {cost: 100}]->(d),
       (b)-[:ROAD {cost: 40}]->(d),
       (c)-[:ROAD {cost: 40}]->(d),
       (c)-[:ROAD {cost: 80}]->(e),
       (d)-[:ROAD {cost: 30}]->(e),
       (d)-[:ROAD {cost: 80}]->(f),
       (e)-[:ROAD {cost: 40}]->(f);

This graph builds a transportation network with roads between locations. Like in the real world, the roads in the graph have different lengths. These lengths are represented by the cost relationship property.

The following statement will project a graph using a Cypher projection and store it in the graph catalog under the name 'myGraph'.

MATCH (source:Location)-[r:ROAD]->(target:Location)
RETURN gds.graph.project(
  'myGraph',
  source,
  target,
  { relationshipProperties: r { .cost } }
)

In the following example we will demonstrate the use of the Dijkstra Shortest Path algorithm using this graph.

Memory Estimation

First off, we will estimate the cost of running the algorithm using the estimate procedure. This can be done with any execution mode. We will use the write mode in this example. Estimating the algorithm is useful to understand the memory impact that running the algorithm on your graph will have. When you later actually run the algorithm in one of the execution modes the system will perform an estimation. If the estimation shows that there is a very high probability of the execution going over its memory limitations, the execution is prohibited. To read more about this, see Automatic estimation and execution blocking.

For more details on estimate in general, see Memory Estimation.

The following will estimate the memory requirements for running the algorithm in write mode:

MATCH (source:Location {name: 'A'})
CALL gds.allShortestPaths.dijkstra.write.estimate('myGraph', {
    sourceNode: source,
    relationshipWeightProperty: 'cost',
    writeRelationshipType: 'PATH'
})
YIELD nodeCount, relationshipCount, bytesMin, bytesMax, requiredMemory
RETURN nodeCount, relationshipCount, bytesMin, bytesMax, requiredMemory

Table 10. Results
nodeCount	relationshipCount	bytesMin	bytesMax	requiredMemory
6	9	736	736	"736 Bytes"

Stream

In the stream execution mode, the algorithm returns the shortest path for each source-target-pair. This allows us to inspect the results directly or post-process them in Cypher without any side effects.

For more details on the stream mode in general, see Stream.

The following will run the algorithm and stream results:

MATCH (source:Location {name: 'A'})
CALL gds.allShortestPaths.dijkstra.stream('myGraph', {
    sourceNode: source,
    relationshipWeightProperty: 'cost'
})
YIELD index, sourceNode, targetNode, totalCost, nodeIds, costs, path
RETURN
    index,
    gds.util.asNode(sourceNode).name AS sourceNodeName,
    gds.util.asNode(targetNode).name AS targetNodeName,
    totalCost,
    [nodeId IN nodeIds | gds.util.asNode(nodeId).name] AS nodeNames,
    costs,
    nodes(path) as path
ORDER BY index

Table 11. Results
index	sourceNodeName	targetNodeName	totalCost	nodeNames	costs	path
0	"A"	"A"	0.0	["A"]	[0.0]	[Node[0]]
1	"A"	"B"	50.0	["A", "B"]	[0.0, 50.0]	[Node[0], Node[1]]
2	"A"	"C"	50.0	["A", "C"]	[0.0, 50.0]	[Node[0], Node[2]]
3	"A"	"D"	90.0	["A", "B", "D"]	[0.0, 50.0, 90.0]	[Node[0], Node[1], Node[3]]
4	"A"	"E"	120.0	["A", "B", "D", "E"]	[0.0, 50.0, 90.0, 120.0]	[Node[0], Node[1], Node[3], Node[4]]
5	"A"	"F"	160.0	["A", "B", "D", "E", "F"]	[0.0, 50.0, 90.0, 120.0, 160.0]	[Node[0], Node[1], Node[3], Node[4], Node[5]]

The result shows the total cost of the shortest path between node A and all other reachable nodes in the graph. It also shows ordered lists of node ids that were traversed to find the shortest paths as well as the accumulated costs of the visited nodes. This can be verified in the example graph. Cypher Path objects can be returned by the path return field. The Path objects contain the node objects and virtual relationships which have a cost property.

Mutate

The mutate execution mode updates the named graph with new relationships. Each new relationship represents a path from source node to target node. The relationship type is configured using the mutateRelationshipType option. The total path cost is stored using the totalCost property.

The mutate mode is especially useful when multiple algorithms are used in conjunction.

For more details on the mutate mode in general, see Mutate.

The following will run the algorithm in mutate mode:

MATCH (source:Location {name: 'A'})
CALL gds.allShortestPaths.dijkstra.mutate('myGraph', {
    sourceNode: source,
    relationshipWeightProperty: 'cost',
    mutateRelationshipType: 'PATH'
})
YIELD relationshipsWritten
RETURN relationshipsWritten

Table 12. Results
relationshipsWritten
6

After executing the above query, the in-memory graph will be updated with new relationships of type PATH. The new relationships will store a single property totalCost.

The relationships produced are always directed, even if the input graph is undirected.

Write

The write execution mode updates the Neo4j database with new relationships. Each new relationship represents a path from source node to target node. The relationship type is configured using the writeRelationshipType option. The total path cost is stored using the totalCost property. The intermediate node ids are stored using the nodeIds property. The accumulated costs to reach an intermediate node are stored using the costs property.

For more details on the write mode in general, see Write.

The following will run the algorithm in write mode:

MATCH (source:Location {name: 'A'})
CALL gds.allShortestPaths.dijkstra.write('myGraph', {
    sourceNode: source,
    relationshipWeightProperty: 'cost',
    writeRelationshipType: 'PATH',
    writeNodeIds: true,
    writeCosts: true
})
YIELD relationshipsWritten
RETURN relationshipsWritten

Table 13. Results
relationshipsWritten
6

The above query will write 6 relationships of type PATH back to Neo4j. The relationships store three properties describing the path: totalCost, nodeIds and costs.

The relationships written are always directed, even if the input graph is undirected.